How To Flash Samsung J1 Ace SM-110G (2019)

0

How To Flash Samsung J1 Ace SM-110G – Samsung J1 Ace is an Android smartphone that has been released in the market for a long time. When it was first sold in the market, there were many enthusiasts. Even today there are still many who use it.

How To Flash Samsung J1 Ace SM-110G

So it is not surprising that at this time many smartphones are experiencing system problems. This kind of thing is indeed normal for android smartphones.

If you are currently looking for how to Flash Asus Zenfone 5 (T00F / T00J) you can read this post.

Not only Samsung J1, but other brands of android smartphones also have the same problem.

System damage that is generally experienced by Samsung J1 is that it has begun to slow down, it often comes out on its own applications, noisy, bootloop even some are dead.

One solution that can be used to restore the performance of the Samsung J1 Ace as before was by re-flashing or flashing.

Flashing is a way to reinstall the firmware of the Samsung J1 Ace which aims to repair the damage to the system so that the phone’s performance returns to normal.

In this article, the admin will give 2 tutorials for Samsung J1 Ace’s Flash Repeat, namely with the help of PC / laptop and via SD Card without PC.

How to Flash Samsung J1 Ace via ODIN With Two Ways

Before you flash again, you must first prepare some equipment and supporting files.

In addition, you are advised to back up your important data in advance on your cellphone, because the flash reset will erase all files in the Smartphone.

Also, try the cellphone battery above 50%. This aims to avoid dropping when flashing.

The most important file you make is Samsung Galaxy J1 Ace SM-110G, the firmware used this time is the original firmware developed by Samsung

Prepare and download several files above and then extras and put them in one folder, so that it is easier to find the file that will be installed into Odin later.

How to Flash via ODIN

    1. Install USB Driver pad PC / laptop used
    2. Enable USB Debugging on mobile by entering the Settings menu >> Developer Options >> USB debugging
      Then check the OEM Unlock option
    3. If Developer Options are not in the Settings menu, you must first activate it by going to Settings> About Device then clicking 6-8 times in the Base Band Version section
  1. Next turn off the Samsung J1 Ace, then turn it on again by pressing the Power + Home + Volume up button simultaneously until the Warning appears
  2. After that, press the volume up once to continue entering Download Made
  3. Use the USB cable that was previously slammed to connect the Samsung J1 Ace to the PC / laptop How to Flash via ODIN
  4. Open and run ODIN How to Flash via ODIN
  5. Look at the Port ID: COM printed in the upper right corner of ODIN, make sure your Samsung J1 Ace is fully connected and read correctly
  6. Enter firmware Samsung Galaxy J1 Ace SM-110G firmware by clicking the AP button in ODIN How to Flash via ODIN (1)
  7. After the firmware has been successfully inserted, now click START to begin the flashing process
  8. Just wait until the repeat flash process is complete
  9. When a green PASS notification appears on ODIN, it means that the flashing process is complete and successfulHow to Flash via ODIN (1)
  10. Wipe your Samsung j1 Ace from the PC / laptop then turn it on
  11. When first booting after a flash reset, it will usually take a while. So just be patient waiting for him.

For those of you who are the first time to flash themselves again will definitely be a little confused. But don’t worry, all you have to do is follow all the tutorials above so you don’t miss anything that will work.

In addition to the above method, there are still other methods that are more simple, namely without a PC using only an SD card. As the following tutorial.

How To Flash Samsung J1 Ace SD Card

This flash method is fairly simple because it does not require a PC / laptop, it is suitable for those of you who don’t want to be complicated or have problems because no PC / laptop can use this method.

In this method, all we need is Samsung J1 Ace and Micro SD firmware stock only. For how you can follow a few steps below

  • Download first Stockod Deodex Samsung J1 Ace (SM – J110G) with ZIP format
  • Transfer the file to the SD card that has been prepared
  • Turn off Samsung J1 Ace
  • Next, enter recovery mode by pressing the Home + Power + Volume Up button simultaneously
  • Then select the Wipe Data/factory reset option followed by selecting Yes – delete all user data
How To Flash Samsung J1 Ace SD Card
Wipe Data/factory reset
  • If you have now selected the Apply Update from External Storage option then navigate to the Samsung J1 Ace Stockrom Deodex file that has been downloaded and transferred to the SD Card earlier
  • Just wait until the install process is complete
  • When done, just select the system reboot option now and your phone will restart automatically
reboot-system-now
Select reboot system now
  • Done.

Also Read:

The Final Word:

So, friends, This was about the complete on How to Flash Samsung J1 Ace via ODIN & SD Card without a PC.

Don’t forget to bookmark and always visit every day at TechOught.com because you will find the latest Technology Android games, Mod Apk, and apps ETC, that we will update every day.

LEAVE A REPLY

Please enter your comment!
Please enter your name here