Computer won’t Boot? Here’s how to fix it. Here Is The Solution

Windows 7 Won’t Boot? Here’s how to fix it. Here Is The Solution.
The following are some common Windows 7 and Vista errors that this guide can fix:

No bootable device – insert boot disk and press any key
NTLDR is missing or corrupted
Ntoskrnl.exe is missing is missing
BOOTMGR is missing or corrupted
NTFS.SYS is missing
Hal.dll is missing

Troubleshooting and Fixing the Computer Can not Boot 

Turn on your computer, boot from your Windows 7 Installation DVD or Windows 7 System Recovery Disc. Remember, you may need to change the boot sequence in the BIOS to make your DVD drive boot first.
Once the installation or recovery disks are loaded, if prompted, choose your language settings then continue. If you are using an installation DVD, when prompted by the following screen, select Repair your computer.
Computer won't Boot?

The computer will take a few moments now to scan itself for any Windows installation, after which you may be given the option of choosing which installation you want to repair. Select the appropriate Windows installation from the list and then continue. If by chance a problem is detected on one of your Windows installations at this early stage, the system may also ask if you can fix the problem automatically. It’s up to you if you want to let the system try to fix itself, but instead, select No.

Read more: How to Remove and Clean a Virus on a Windows 10 Laptop

Once you reach the System Recovery Options screen, as shown below, you will be presented with a list of options that can help you fix the corrupted Windows 7 operating system. If you want to try the Startup Repair option first, it often fixes many different startup problems automatically, but in this article, we will use the Command Prompt option to resolve the problem manually. So, click Command Prompt to continue.

Computer Can not Boot and How to Fix it

Now in the command prompt, enter the following command and then press enter:

Bootrec.exe / FixMbr

If successful, you should be greeted with the message The operation completed successfully. There he is! Your Master Boot Record has been fixed.

The above command to resolve the MBR, and sometimes enough, there may still be an error with the system partition boot sector and Boot Configuration Data (BCD). The occurrence of BCD usually appears because you are trying to install other operating systems other than Windows 7, or an error when activating Windows 7, so the computer can not boot. To write a new boot sector, try the following commands:

Bootrec.exe / FixBoot

If you still face the installation of Windows 7 you are not detected at startup, or if you want to enter more than one choice of operating system to your system boot list, you can try the following command to rebuild your BCD:

Bootrec.exe / RebuildBcd

The above command will scan all your disks for other operating systems compatible with Windows 7 and lets you add them to your system boot list. If this fails, you may need to back up the old BCD * folder and create a new one in its place with the following command:

Bcdedit / export C: \ BCD_Backup
Cd boot
Attrib bcd -s -h -r
Ren c: \ boot \ bcd bcd.old

Bootrec / RebuildBcd

Some users also find simply deleting the boot folder and retrying the above steps effectively when resolving unbootable computer problems, but not recommended.

How to Change Active Partition

After deliberately changing the active partition on the system drive, I am faced with BOOTMGR lost due to errors when starting my system which prevents Windows from starting. This is a common mistake to do when playing with partitions on the system drive and this can make us headaches if no solution is found. To change your active partition again using Windows 7 recovery disk or Installation DVD, follow the steps below.

Follow steps one through four in the guide above. This will take you to Command Prompt in the Windows Recovery Environment.
Laptop problems can not connect to wifi can be very frustrating, especially when it happens at the most urgent time (such as when you need to send an email to meet deadlines and are working on the road without access to technical support). But do not worry, laptop problem can not connect to Wifi hopefully can be overcome with a guide which will be discussed below.

Read more: Why Laptop Can Not Connect To Wifi? Here’s The Solution

  • Type diskpart and press Enter.
  • Type ‘Disk List’ and then press Enter. This command will list all the disks attached to your computer and give them the disk number.
  • Type Select Disk x, where x is the number for the disk containing the partition you want to enable. Press enter.
  • Type ‘List Partition’ and press Enter. You will now be shown a list of partitions on the selected disk. Determine which partition you want to enable.
  • You will see a list that will display your system partition. Examples such as below:

Partition 1 OEM 39 MB
Partition 2 Primer 750 MB
Partition 3 Primer 297 GB <select the partition with Windows, which may be the first larger than 16 GB

Read more: How to Lock Any File in Laptop Windows 10

Type Select Partition x, where x is the number of partitions you want to enable.
Now, just type Active and then press Enter. That should be the currently selected partition active.


That’s the discussion on this opportunity about the computer cannot boot and how to solve it. Maybe useful.


Please enter your comment!
Please enter your name here